[. . . ] Always there to help you Register your product and get support at www. philips. com/support Question?Contact Philips BDP2190 User manual Safety and important notice Read and understand all instructions before you use this Blu-ray disc/ DVD player. If damage is caused by failure to follow the instructions, the warranty does not apply. voltage matches the value printed on the back or bottom of the product. Never connect the product to the power outlet if the voltage is different. [. . . ] • A USB storage device is used to store the downloaded BD-Live content. • To delete the BD-Live previously downloaded on the USB storage device for memory release, press and select [Setup] > [Advanced] > [Clear memory]. On the BD-Live interface, select an item to access. Note Set up a network Connect this player to the Internet to access the following service: • BD-Live: access online bonus features (applicable to Blu-ray discs that are BDLive enabled). 3 4 1 Connect this player to the Internet through wired (Ethernet) connection. • Connect a network cable (not supplied) to the LAN port on the back panel of this player. 5 •• BD-Live services vary from discs and countries. •• When you use BD-Live, data on the disc and this player •• Use a USB storage device with at least 1GB of free space to store the download. are accessed by the content provider 2 Play a Blu-ray 3D video What you need • A 3D compliant TV • This player is connected to the TV through HDMI • 3D glasses compatible with the TV • 3D Blu-ray disc 6 EN Perform the network installation. 1) Press . 4)  ollow the instructions on the TV screen to F complete the installation. Caution •• Before you connect to a network, familiarize yourself with the network router and networking principles. Philips is not responsible for lost, damaged, or corrupt data. 2 Change settings This section helps you change the settings of this player. 1 Use Philips EasyLink This player supports Philips EasyLink which uses the HDMI CEC (Consumer Electronics Control) protocol. You can use a single remote control to control EasyLink compliant devices that are connected through HDMI. Philips does not guarantee 100% interoperability with all HDMI CEC devices. 2 3 TV display HDMI video Picture settings 16:9 Widescreen 3 Watch 3D video 1 2 3 4 Connect the HDMI CEC compliant devices through HDMI, and turn on the HDMI CEC operations on the TV and other connected devices (see the user manual of the TV or other devices for details). Select [On] under the options: [EasyLink], [One Touch Play] and [One Touch Standby]. »» EasyLink function is turned on. Note •• You cannot change a menu option that is grayed out. To exit the menu, press . Picture 1 2 • • • Press . [HDMI Deep Color]: Display colors with more shades and hues when the video content is recorded in Deep Color and the TV supports this feature. [Watch 3D video]: Set to 3D or 2D output when playing a Blu-ray 3D disc. The player must be connected to a 3D TV through HDMI. EN 7 One Touch Play When a video disc is in the disc compartment, press to wake up the TV from standby, and then play a disc. One Touch Standby When a connected device (for example TV) is put to standby with its own remote control, this player is put to standby automatically. • • Note •• If you change a setting, make sure that the TV supports the new setting. Preference (languages, parental control. . . ) 1 2 • Press . Select [Setup] > [Preference] to access the preference setup options. [Parental control]: Restrict access to discs that are encoded with ratings. To play all discs irrespective of the rating, select level "8". If enabled, the screen enters idle mode after 10 minutes of inactivity (for example, in pause or stop mode). If enabled, the subtitle position is changed automatically to fit the TV screen (this feature works with some Philips TVs only). [. . . ] •• Make sure that the format of the USB storage device is compatible with this player. •• Make sure that the file system on the USB storage device is supported by this player. •• For a USB HDD (a portable hard disc drive), an external power source may be needed.    'No entry' or 'x' sign is displayed on the TV. • Make sure that this player is connected to the Philips brand EasyLink TV, and the EasyLink option is turned on (see "Use your Blu-ray disc/ DVD player" > "Use Philips EasyLink"). [. . . ]